Jinko Solar JKM430N-54HL4R-BK 430Wp All-Black Tiger Neo N-type Module min 36pcs

Jinko Solar JKM430N-54HL4R-BK 430Wp All-Black Tiger Neo N-type Monocrystalline Photovoltaic Module

Jinko’s JKM430N-54HL4R-BK has a capacity of 430 watt-peak with 108 photovoltaic cells. The solar panels are mounted in an all-black frame and are 1762x1134x30mm each. The Jinko 430Wp is part of the Tiger Neo N-type series and is exactly 2m2 large. This means these panels produce more power and deliver higher yields per square metre, even in cloudy weather. Moreover, the Jinko 430Wp is not affected by Light Induced Degradation (LID), so there is less loss of performance. And Jinko N-type solar panels come with a 15-year manufacturer’s warranty!

The panels are delivered on pallets of 36 or more this.

• Super multi-busbar technology
• Hot 2.0 technology
• PID resistance (Excellent anti-PID performance guarantee thanks to optimized mass production processes and material control)
• Positive power tolerance of 0~+3%
• Improved mechanical resistance to external influences
• Improved performance in low light
• Manufacturer product guarantee: 15 years

N-type technology
Compared to P-type products, N-type cells, which are used with a different doping technology, perform better in terms of power dissipation. The significant increase in the bifacial factor and the optimization of the operating temperature also bring a higher performance gain. When it comes to the LCOE value (levelized cost of electricity), the analysis result has been significantly reduced compared to conventional P-type modules.

HOT 2.0 technology
Efficient passivation contact technology is applied in HOT 2.0 cells, which updates micro-nano tunneling through the oxide layer and carrier-selective lamination of microcrystalline silicon thin films on the back side. This advanced structure contributes to better passivation performance and electrical conductivity, increasing cell efficiency and power generation performance. Under the conditions of mass production, the maximum efficiency of the N-type HOT2.0 cell is over 21% and has a wide application perspective in the near future.

Super multi busbar technology
Busbars are located on each PV module. These are busbars that are firmly printed on each solar cell. They absorb the generated direct current and lead it to the busbars. By using more busbars, Jinko reduces shadowing, shortens transport routes and lowers resistance in the modules.

Specification:
Model: JKM430N-54HL4R-BK;
Nominal Power: 430 Wp;
Cell Type: N-Type Monocrystalline;
Number of cells in series: 108 (6x18);
Open-circuit Voltage (Voc): 39.16 V;
Maximum Power Voltage (Vmp): 32.58 V;
Short-circuit Current (Isc): 13.65 A;
Maximum Power Current (Imp): 13.2 A;
Max System Voltage: 1000 V DC (IEC);
Max series fuse rating: 25 A;
Output tolerance: 0 ~ + 3%;
Module Efficiency: 21.52 %;
Frame: anodizedaluminium alloy;
Front glass: 3.2 mm, anti-reflection coating, high transmission, low iron, tempered glass;
Dimension: 1762x1134x30 mm;
Weight: 22 kg.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.